surface mount multilayer ceramic chip capacitors for commercial applications document number: 45127 for technical questions, contact: mlcc@vishay.com www.vishay.com revision: 10-apr-08 43 vj x7r dielectric vishay vitramon features ? general purpose dielectric ? excellent aging characteristics ? ideal for decoupling and filtering ? ideal for surge suppression and high voltage applications ? wide range of case sizes, vo ltage ratings and capacitance values ? protective surface coating of high voltage capacitors maybe required to prevent surface arcing ? surface mount, precious metal technology, wet built process electrical specifications note: electrical characteri stics at + 25 c unless otherwise specified operating temperature: - 55 c to + 125 c capacitance range: 100 pf to 1.8 f voltage rating: 10 vdc to 1000 vdc temperature coefficient of capacitance (tcc): x7r: 15 % from - 55 c to + 125 c, with 0 vdc applied x5r: 15 % from - 55 c to + 85 c, with 0 vdc applied (4) dissipation factor (df): 25 v ratings: 3.5 % maximum at 1.0 v rms and 1 khz > 25 v ratings: 2.5 % maximum at 1.0 v rms and 1 khz aging rate: 1 % maximum per decade insulation resi stance (ir): at + 25 c and rated voltage 100 000 m minimum or 1000 f, whichever is less at + 125 c and rated voltage 10 000 m minimum or 100 f, whichever is less dielectric withstanding voltage (dwv): this is the maximum voltage th e capacitors are tested for a 1 to 5 second period and the charge/discharge current does not exceed 50 ma 200 vdc: dwv at 250 % of rated voltage 500 vdc: dwv at 200 % of rated voltage 630/1000 vdc: dwv at 150 % of rated voltage notes: (1) dc voltage rating should not be exceeded in application (2) process code may be added with up to three digits, used to control non-standard products and/or special requirements (3) case size designator may be replaced by four digit drawing number us ed to control non-standard pr oducts and/or special require ments (4) selected values for x5r, see selection chart ordering information vj0805 (3) y 102 k x a a t ### (2) case code dielectric capacitance nominal code capacitance tolerance termination dc voltage rating (1) marking packaging process code 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 3640 y = x7r g = x5r (4) expressed in picofarads (pf). the first two digits are significant, the third is a multiplier. examples: 102 = 1000 pf j = 5 % k = 10 % m = 20 % x = ni barrier 100 % tin plated f = agpd q = 10 v j = 16 v x = 25 v a = 50 v b = 100 v c = 200 v e = 500 v l = 630 v g = 1000 v a = unmarked m = marked note: marking is only available for 0805 and 1206 t = 7" reel/plastic tape c = 7" reel/paper tape r = 11 1/4" reel/plastic tape p = 11 1/4" reel/paper tape o = 7" reel/flamed paper tape i = 11 1/4"/13"reel/flamed paper tape note: ?i? and ?o? is used for ?f? termination paper taped rohs compliant
www.vishay.com for technical ques tions, contact: mlcc@vishay.com document number: 45127 44 revision: 10-apr-08 vj x7r dielectric vishay vitramon surface mount multilayer ceramic chip capacitors for commercial applications dimensions in inches [millimeters] eia style part ordering number length (l) width (w) maximum thickness (t) termination (p) minimum maximum 0402 vj0402 0.040 + 0.004/- 0.002 [1.00 + 0.10/- 0.05] 0.020 + 0.004/- 0.002 [0.50 + 0.10/- 0.05] 0.024 [0.60] 0.004 [0.10] 0.016 [0.41] 0603 vj0603 0.063 0.005 [1.60 0.12] 0.031 0.005 [0.80 0.12] 0.036 [0.92] 0.012 [0.30] 0.018 [0.46] 0805 vj0805 0.079 0.008 [2.00 0.20] 0.049 0.008 [1.25 0.20] 0.057 [1.45] 0.010 [0.25] 0.028 [0.71] 1206 vj1206 0.126 0.008 [3.20 0.20] 0.063 0.008 [1.60 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71] 1210 vj1210 0.126 0.008 [3.20 0.20] 0.098 0.008 [2.50 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71] -vj1808 0.177 0.010 [4.50 0.25] 0.080 0.010 [2.03 0.25] 0.067 [1.70] 0.010 [0.25] 0.030 [0.76] 1812 vj1812 0.177 0.010 [4.50 0.25] 0.126 0.008 [3.20 0.20] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] 1825 vj1825 0.177 0.010 [4.50 0.25] 0.252 0.010 [6.40 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] -vj2220 0.220 0.008 [5.59 0.20] 0.200 0.010 [5.08 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] -vj2225 0.220 0.010 [5.59 0.25] 0.250 0.010 [6.35 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] -vj3640 0.360 0.015 [9.14 0.38] 0.400 0.015 [10.20 0.38] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76] l w t max. p
vj x7r dielectric surface mount multilayer ceramic chip capacitors for commercial applications vishay vitramon document number: 45127 for technical questions, contact: mlcc@vishay.com www.vishay.com revision: 10-apr-08 45 notes: (1) see soldering recommendations within th is data book, or visit www.vishay.com/doc?45034 (2) x5r (- 55 c to + 85 c tcc: 15 %) for all 0805/10 v ratings ?? paper tape ? plastic tape selection chart (2) style vj0402 vj0603 vj0805 vj1206 vj1210 (1) eia type 0402 0603 0805 1206 1210 voltage (vdc) 16 25 50 100 16 25 50 100 200 10 16 25 50 100 200 500 16 25 50 100 200 500 630 16 25 50 100 200 500 630 cap. code cap. 121 120 pf ?? ?? ?? ?? 151 150 pf ?? ?? ?? ?? 181 180 pf ?? ?? ?? ?? 221 220 pf ?? ?? ?? ?? 271 270 pf ?? ?? ?? ?? 331 330 pf ?? ?? ?? ?? ?? ?? ?? ?? 391 390 pf ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ? 471 470 pf ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ? 561 560 pf ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ? 681 680 pf ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ? ? ? ? 821 820 pf ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ? ? ? ? 102 1000 pf ?????????????????? ?????????? ??????? ?? 122 1200 pf ?????????????????? ?????????? ??????? ?? 152 1500 pf ?????????????????? ?????????? ??????? ?? 182 1800 pf ?????????????????? ?????????? ??????? ?? 222 2200 pf ?????????????????? ?????????? ??????? ?? 272 2700 pf ?????????????????? ?????????? ??????? ?? 332 3300 pf ?????????????????? ?????????? ??????? ??? 392 3900 pf ?????????????????? ?????????? ??????? ??? 472 4700 pf ?????????????????? ?????????? ??????? ??? 562 5600 pf ?????? ???????? ?????????? ?????? ??? 682 6800 pf ?????? ???????? ?????????? ?????? ??? 822 8200 pf ?????? ???????? ?????????? ?????? ??? 103 0.010 f ?????? ???????? ?????????? ?????? ??????? 123 0.012 f ???? ???????? ?????????? ?????? ?????? 153 0.015 f ???? ???????? ????????? ?????? ?????? 183 0.018 f ???? ???????? ????????? ?????? ?????? 223 0.022 f ?? ???????? ????????? ????? ?????? 273 0.027 f ?? ???????? ????????? ????? ?????? 333 0.033 f ?? ???????? ??????? ????? ?????? 393 0.039 f ?? ???????? ??????? ????? ?????? 473 0.047 f ?? ?????? ??????? ????? ????? 563 0.056 f ?????? ??????? ????? ????? 683 0.068 f ?????? ???? ????? ????? 823 0.082 f ?????? ???? ????? ????? 104 0.10 f ?????? ??? ????? ????? 124 0.12 f ? ??? ???? ????? 154 0.15 f ? ??? ???? ????? 184 0.18 f ?? ???? ???? 224 0.22 f ?? ???? ???? 274 0.27 f ?? ???? ???? 334 0.33 f ?? ??? ???? 394 0.39 f ? ??? ???? 474 0.47 f ? ??? ???? 564 0.56 f ? ?? ??? 684 0.68 f ? ?? ??? 824 0.82 f ? ?? ??? 105 1.0 f ? ?? ??? 125 1.2 f 155 1.5 f 185 1.8 f 225 2.2 f 275 2.7 f 335 3.3 f 395 3.9 f 475 4.7 f 565 5.6 f 685 6.5 f
www.vishay.com for technical ques tions, contact: mlcc@vishay.com document number: 45127 46 revision: 10-apr-08 vj x7r dielectric vishay vitramon surface mount multilayer ceramic chip capacitors for commercial applications note: (1) see soldering recommendations within this data book, or visit www.vishay.com/doc?45034 ? plastic tape selection chart style vj1808 (1) vj1812 (1) vj1825 (1) vj2220 (1) vj2225 (1) vj3640 (1) eia type - 1812 1825 - - - voltage (vdc) 50 100 200 500 1000 25 50 100 200 500 1000 25 50 100 200 500 1000 50 100 200 500 25 50 100 200 500 1000 25 50 100 200 500 cap. code cap. 121 120 pf 151 150 pf 181 180 pf 221 220 pf 271 270 pf 331 330 pf 391 390 pf 471 470 pf ? 561 560 pf ? 681 680 pf ? 821 820 pf ? 102 1000 pf ?? ? 122 1200 pf ?? ? 152 1500 pf ?? ? 182 1800 pf ?? ? 222 2200 pf ?? ? 272 2700 pf ?? ? 332 3300 pf ?? ? ? 392 3900 pf ?? ? ? 472 4700 pf ??? ? ? 562 5600 pf ??? ? ? 682 6800 pf ??? ? ? 822 8200 pf ??? ? ? 103 0.010 f ???? ? ? ? ? 123 0.012 f ???? ? ? ? 153 0.015 f ???? ? ? ? ? ? ? 183 0.018 f ???? ? ? ? ? ? ? 223 0.022 f ???? ????? ? ?????? ? 273 0.027 f ???? ????? ? ?????? ? ? 333 0.033 f ??? ????? ?????? ?????? ? ?? 393 0.039 f ??? ????? ?????? ?????? ? ?? 473 0.047 f ??? ????? ?????? ?????? ? ?? 563 0.056 f ??? ????? ?????? ?????? ? ?? 683 0.068 f ??? ????? ????? ?????? ? ?? 823 0.082 f ??? ????? ????? ?????? ? ?? 104 0.10 f ??? ????? ????? ??????? ? ?? 124 0.12 f ?? ???? ????? ??????? ?? 154 0.15 f ?? ???? ????? ??????? ?? 184 0.18 f ?? ???? ????? ? ????? ????? 224 0.22 f ? ???? ???? ? ????? ????? 274 0.27 f ? ???? ???? ??? ????? ????? 334 0.33 f ???? ???? ??? ????? ????? 394 0.39 f ???? ???? ??? ???? ????? 474 0.47 f ??? ???? ??? ???? ????? 564 0.56 f ??? ???? ?? ???? ????? 684 0.68 f ??? ???? ?? ???? ????? 824 0.82 f ??? ??? ?? ???? ???? 105 1.0 f ?? ??? ?? ???? ???? 125 1.2 f ??? ?? ???? ???? 155 1.5 f ??? ? ??? ???? 185 1.8 f ?? ? ??? ???? 225 2.2 f ?????? 275 2.7 f ?????? 335 3.3 f ???? 395 3.9 f ???? 475 4.7 f ??? 565 5.6 f ? 685 6.5 f ?
vj x7r dielectric surface mount multilayer ceramic chip capacitors for commercial applications vishay vitramon document number: 45127 for technical questions, contact: mlcc@vishay.com www.vishay.com revision: 10-apr-08 47 x7r dielectric - typical parameters 15 10 5 0 - 5 - 10 - 15 - 20 temperature c % capacitance change x7r - 25 - 30 typical parameter x7r temperature coefficient of capacitance - 75 - 50 - 25 0 20 50 75 100 125 150 175 hours 1.0 0.0 - 1.0 - 2.0 % capacitance change - 3.0 - 4.0 typical parameter x7r aging rate - x7r 1 10 100 1000 10 000 100 50 temperature c % voltage 0 typical parameter x7r voltage vs. temperature 150 200 - 75 - 50 - 25 0 20 50 75 100 125 150 175 1 8 0 0.020 0.016 0.012 0.00 8 0.004 typical parameter x7r dissipation factor vs. voltage 50 v 100 v voltage dissipation factor 0 10 20 30 40 50 60 70 8 0 90 100 un/v- 0.0 dissipation factor vs. temperature temperature c % dissipation factor 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 typical parameter x7r - 75 - 50 - 25 0 25 50 75 100 125 150 175 x7r 10 25 100 10 000 1000 100 10 insulation resistance ( w f) 150 typical parameter x7r minimum insulation resistance vs. temperature temperature c 0 10 20 30 40 50 60 70 8 0 90 100 0 - 15 - 20 - 25 - 30 - 10 5 5 25 v rated 50 v 100 v typical parameter x7r voltage coefficient of capacitance - x7r dc volts applied % capacitance change rated rated typical parameter x7r dissipation factor vs. voltage 0 100 200 300 400 500 600 700 un/v- 0.020 0.016 0.012 0.00 8 0.000 500/630 v 200 v voltage dissipation factor
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
